Waxes for pigment dispersions

chemical characterisation:	polyester wax
acid number [mg KOH/g]:	11
drop point [°C]:	60
density at 23°C [g/cm3]:	0.97
color/supply form:	white prills
main applications:	flow improvement and pigment dispersion in polar and non polar plastics; compatibiliser for fibres and fillers; flow and levelling additive in powder coatings
melt viscosity (at T) [mPa*s]:	550 (120°C)
penetration at 25°C [mm*10-¹]:	5
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	maleic acid anhydride grafted PE wax
acid number [mg KOH/g]:	30
drop point [°C]:	112
density at 23°C [g/cm3]:	0.96
color/supply form:	almost white flakes*
main applications:	coupling agent for fibres / fillers in PE and PVC based WPC, hot melt, water based emulsions
melt viscosity (at T) [mPa*s]:	150 (120°C)
penetration at 25°C [mm*10-¹]:	< 1
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	polyester wax
acid number [mg KOH/g]:	40
drop point [°C]:	70
density at 23°C [g/cm3]:	0.97
color/supply form:	white prills
main applications:	dispersing additive for technical plastics; compatibilizer for fibers and fillers; improved flow properties and gloss
melt viscosity (at T) [mPa*s]:	150 (120°C)
penetration at 25°C [mm*10-¹]:	3
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics: