World of Waxes

ceronas Visual - Tanz

Wax blends for specific applications

Wax blends for specific applications

Download Product overview

chemical characterisation:	wax compound
acid number [mg KOH/g]:	10
drop point [°C]:	107
color/supply form:	white flakes
main applications:	stabiliser for paraffins and microcrystalline waxes in solvent borne formulations / release agent formulations
melt viscosity (at T) [mPa*s]:	20 (120°C)
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	lithium saponified synthetic wax
acid number [mg KOH/g]:	13
drop point [°C]:	110
density at 23°C [g/cm3]:	0.94
color/supply form:	pale yellowish flakes*
main applications:	mould release and polishes, solvent- and waterborne, sizing agent
melt viscosity (at T) [mPa*s]:	230 (140°C)
penetration at 25°C [mm*10-¹]:	2
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	polyester wax
acid number [mg KOH/g]:	11
drop point [°C]:	60
density at 23°C [g/cm3]:	0.97
color/supply form:	white prills
main applications:	flow improvement and pigment dispersion in polar and non polar plastics; compatibiliser for fibres and fillers; flow and levelling additive in powder coatings
melt viscosity (at T) [mPa*s]:	550 (120°C)
penetration at 25°C [mm*10-¹]:	5
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	maleic acid anhydride grafted wax
acid number [mg KOH/g]:	30
drop point [°C]:	108
density at 23°C [g/cm3]:	0.97
color/supply form:	almost white flakes*
main applications:	wetting and compatibilising of wood fibres
melt viscosity (at T) [mPa*s]:	40 (120°C)
penetration at 25°C [mm*10-¹]:	< 1
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	maleic acid anhydride grafted PE wax
acid number [mg KOH/g]:	30
drop point [°C]:	112
density at 23°C [g/cm3]:	0.96
color/supply form:	almost white flakes*
main applications:	coupling agent for fibres / fillers in PE and PVC based WPC, hot melt, water based emulsions
melt viscosity (at T) [mPa*s]:	150 (120°C)
penetration at 25°C [mm*10-¹]:	< 1
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	silicone modified polyester wax
acid number [mg KOH/g]:	40
drop point [°C]:	68
density at 23°C [g/cm3]:	0.98
color/supply form:	almost white prills
main applications:	release agent for plastics processing and in emulsions
melt viscosity (at T) [mPa*s]:	200 (120°C)
penetration at 25°C [mm*10-¹]:	8
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	phosphonate functionalised wax
acid number [mg KOH/g]:	14
drop point [°C]:	72
color/supply form:	yellowish-white
main applications:	paste building additive in lubricant formulations. Dispersing additive for inorganic fillers, lubricant in plastic processing by adsorption on metal surface
melt viscosity (at T) [mPa*s]:	50 (120°C)
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

chemical characterisation:	maleic acid anhydride grafted PP wax
acid number [mg KOH/g]:	40
drop point [°C]:	152
density at 23°C [g/cm3]:	0.93
color/supply form:	pale yellowish flakes*
main applications:	coupling agent in glass fibre filled PP, compatibliser in PP based WPC
melt viscosity (at T) [mPa*s]:	800 (170°C)
penetration at 25°C [mm*10-¹]:	< 1
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

description:	nucleating additive for PP
color/supply form:	white powder
main applications:	synergistic working additive based on a nano-scale nucleating agent polymerised in a flow improving additive
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics:

description:	MFI increasing additive for PP
color/supply form:	off white granules
main applications:	additive to increase/adjust the MFI of PP (e.g. recycled) for injection moulding application, provides additionally high surface gloss and improved flow properties
compatabiliser for glass fibre reinforced plastic:
flow & release additives for plastic processing:
texturing additives for powder coatings:
dispersing agents in color and additives masterbatches:
nucleating agents for plastics: